Hybrid Tune ECU remapping and tuning specialists


Syvecs S7 Plus ECU

£2,600.00 ex VAT

The Syvecs S7 Plus ECU is our newest engine management system.

Offering 22 x Inputs, 16 x Fuel Outputs, 8 x H-Bridge Outputs 6 x Ignition Outputs, 2 x Lambda Input, 2 x Knock Input, 2 x EGT Input and Main Relay Control.

All software features are enabled from factory except for Direct Injection control and Paddle-Shift control which is an optional upgrade.

Syvecs S7 Plus ECU offers an extremely precise level of precise engine management control. The triple processor unit uses a high speed RISC processor for code execution and an additional large FPGA for high speed engine position tracking.

This allows the scheduling of code to be independent of signal patterns, increasing flexibility, efficiency and accuracy under transient conditions. This powerful combination also allows advanced control algorithms that are easy to map for the end user still using our SCal software and S7 Firmware.

Designed to cater for PnP kits where clients also need the programmable CAN Bus and Drive-By-Wire support offered by the S7-Plus.

Users will have the option to write their own code in C for Full Vehicle Integration via Can bus. In addition, they will be able to build some customized strategies to handle some of the unique requirements that are found in OEM applications in the future. Currently only Syvecs staff can do this but we are working on offering this out to all our dealers very soon!

With 3 x waterproof connectors offering 94 pins, this unit is housed in a sealed aluminium billet enclosure.

Syvecs S7 Plus ECU Inputs

  • 22 x General Purpose Analogue Inputs:
  • 10 x 5V/Bipolar, Sensor/Sync/Speed, Programmable Trigger Voltages
  • 4 x 5V/Thermistor, Sensor/Sync/Speed, Fixed Trigger Voltages
  • 4 x 5V Sensor Input
  • 4 x Thermistor Sensor Input
  • 2 x NTK / LSU4.9 / Denso AF Lambda Inputs
  • 1 x K-Type Thermocouple Circuit (Two Available if not use 2nd Canbus)
  • 2x Knock Input

Syvecs S7 Plus ECU Outputs

  • 30 x High/Low Side Driver Outputs:
  • 8 x Half Bridge Outputs (Max 10 Amps)
  • 16 x Low Side Injection/PWM Outputs (Max 10 Amps)
  • 6 x TTL / IGBT Ignition Drivers
  • Main Relay Control Circuit with Wake on Can Support

Syvecs S7 Plus ECU Comms

  • 3 x Can 2.0B - (3rd CanBus takes over EGT1 Pins and not programmable from Scal, Custom Use only)
  • 1 x Rs232 Output
  • 1 x Kline Output
  • 100 Mhz Full Duplex Ethernet For Connection To PC For Programming And Data Download
  • Up to 64MB Internal Logging Memory (Standard is 32mb) aswell as Onboard Laptop Logging
  • 6 to 20v input voltage range with reverse polarity protection
  • 3 x regulated 5V sensor supply outputs with protection
  • Operating Temperature -55 to +125 C
  • Dimensions : 185 X 145 X 55 mm

Get in touch with us today to combine this brilliant S7 PLUS ECU within your system and combine it with our bespoke dyno calibration.

    Your Cart
    Your cart is emptyReturn to Shop