Life Racing X10 Expansion
Call for price
The Life Racing X10 Expansion provides low-cost input and output growth for any Life Racing ECU. Its ten analogue inputs, ten PWM outputs, and two full bridge outputs all appear as additional general-purpose pins in the ECU configuration.
The Life Racing X10 Expansion adds input and output extension to any Life Racing ECU at a low cost.
Its ten analogue inputs, ten PWM outputs, and two full bridge outputs all appear as additional general-purpose pins in the ECU configuration. To allow functions such as drive-by-wire throttle control, wheelspeed frequency inputs for traction control, or paddle shift gearbox control to be placed on X10 pins, a dedicated low-latency protocol is used.
This hardware is housed in a lightweight CNC billet aluminium case. Designed to be installed in harsh motorsport environments.
Life Racing X10 Expansion General
- Microprocessor controlled ECU expansion unit
X10 Outputs
- 10 user configurable general purpose Pulse Width Modulated power outputs
- 2 full bridges also configurable as 4 half bridges or 4 PWMs*
* Not all functions available simultaneously see relevant pinout documentation
X10 Inputs
- 10 user configurable general purpose analogue sensor inputs, including up to 6 bipolar,
inductive or hall effect speed / engine position inputs*
* Not all functions available simultaneously see relevant pinout documentation
Interfaces
- 100MHz full duplex Ethernet for firmware upgrades
- 1 dedicated CAN 2.0B interface for custom master/slave link to any Life Racing ECU
- 1 CAN 2.0B interface for communication with other controllers or logging systems
Power Supply
- 6 to 32V input voltage range with reverse polarity protection
- 1 regulated 5V sensor supply output with individual short circuit protection
- 1 protected sensor ground connection
Physical
- 35 Way AMP sealed connector
- CNC machined aluminium case sealed to IP67
- Maximum dimensions including the connector 130 x 121 x 43 mm
- Total mass is ~360 grams
- Operating Temperature -25 to +85°C