AiM Solo 2 DL GPS Lap Timer With ECU Connection

AiM Solo 2 DL setting the standard for GPS lap timers

Setting the standard of GPS lap timers. The AiM Solo 2 DL now receives data from two satellite constellations GPS and Glonass. Giving a significant improvement in data-speed and positioning precision. Consequently, startup time is just a few seconds and lap times are accurate to two-hundredths of a second. A comprehensive range of compatible ECUs allows for an easy installation. However, if your particular ECU protocol is not supported, an ECU Driver Builder is available in the included Race Studio 3 Software.

This DL version has additional inputs, sampling data directly from the ECU. Although sampled data depends on the ECU but typically includes, RPM, engine load, throttle position, oil /air/water temperature, oil pressure, battery voltage, speed, gear, lambda value (air/fuel ratio) etc. Furthermore, around 3000 different ECU’s supported both stock and racing. A choice of ECU connections is available depending on the connection. Using the obdII or directly through the CAN/RS232 channel. Additionally, the Solo 2 DL has a coil RPM input. Together with a digital input derived from either square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger - primary circuit).

Ultra-sharp high contrast TFT display

The Solo 2 features a high contrast ultra-sharp display. Furthermore with the option of 7 different backlight colours. Drivers or riders can select a colour based on conditions, helping to easily identify data being displayed.

Database of over 3000 Worldwide tracks

AiM’s Solo 2 has a pre-loaded database of over 3000 tracks. Switch the unit on, it identifies its position and loads the start line coordinates. Immediately ready to begin recording lap times. Furthermore, if the track you’re at isn’t recognised, the Solo 2 DL automatically enters learning mode. Building a track layout based on your car or bikes position and then records lap times.

AiM Solo 2 DL improved GPS technology

With improved GPS technology and a highly reliable predictive lap timing function. Notably, the AiM Solo 2 can display your current lap versus your best lap in real time. Additionally, the units configurable LED's also giving you a visual indication whether you’re quicker or slower. Furthermore, the Solo 2 DL also features a theoretical lap timing mode. Stitching together your best sector times and providing an optimal achievable lap time. Comparatively the unit can also display timing information in delta format, providing a representation of how much you are quicker or slower than your best lap.

Compatible with AiM’s Race Studio 3 software

Not just restricted for circuit and track day use, the Solo 2 is perfect for point to point events and 0 to 60mph performance tests. Similarly, as with circuit mode, all recorded data is ready to view immediately after the session. Additionally, if you want to review data in more depth. The Solo 2 DL has integrated wifi allowing you to transfer data securely to a laptop or computer. Also, you can then import data into AiM’s Race Studio 3 software for full analysis.

AiM Solo 2 DL Technical Specifications

• Resolution:128x64 pixels
• Pages: Uniquely up to 8 freely configurable
• Backlight: 7 configurable RGB colours
• Shift lights/alarm LEDs: 10 configurable RGB LEDs
• Integrated track database: Yes
• Inertial platform:Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer
• Wi-Fi connection: Yes
• GPS: 10 Hz External power similarly 12 V
• Memory: 4 GB
• Battery type: Rechargeable Lithium
• Pushbuttons: Metallic
• Dimensions: 98.0x73.7x30.2 mm
• Weight: 240 g, battery included
• Waterproof: IP65

Solo 2 DL ECU connection: CAN, RS232 or K-Line to 3,000 + industry leading ECUs